Spring Assist Kit          

 

Home
Up
Spring Photos
To Order

 

 

 

 

Front Coil Over Spring Assist Kit:

Designed for the 2007 and newer Sprinter Class C motorhomes, the front coil over spring assist kit will reduce porpoising front to rear and improve handling. The kit gives 300 pounds of added weight control per side and is easy to install. No alignment is necessary. The front coil over spring assist kit can be used in other Sprinter NCV3 applications. Give us a call if you have any questions about how this kit can help you.

"The front end is more neutral, I mean when the front of the rig hits a bump, it simply compresses then pushes back to standard riding height without bottoming out or porpoising. It doesn’t bounce or dance around, it’s just solid."

 

John S. Seattle WA  08 Navion

07 and newer Front Coil Over Spring Assist Kit: $595 plus shipping and handling, allow 2-3 weeks for delivery

 

Rear Spring Assist Kit:

The Sprinter Rear Spring Assist Kits are designed specifically for your Sprinter when carrying loads of 2000 pounds or more.  The spring rate is progressive.  The kits work in conjunction with the factory springs giving you assist when carrying heavy loads but remain passive under normal no load driving conditions.  The spring kits assist the factory suspension when under heavy load or body sway situations giving you improved stability, reduced body roll and reduced tail wag when towing heavy loads.  During every day driving you will notice little difference.  When you encounter those annoying dips pulling into or out of parking lots, you will realize the rear end sway of your Sprinter has been reduced.

The Spring Assist Kits offer 1700 lbs., 2000 lbs. or 2500 lbs. of assist depending on Sprinter model.  Each spring pack consists of two leaves with spring bumpers at each end of the longest spring.  Spring lengths and arch are designed to work with each specific factory spring assembly.  On the Sprinter 2500 model, the assist spring bumper's height, width and density is a design that works well when used with the factory parabolic springs .  Spring assist bumper contact with the factory spring occurs with a load of approximately 1500 lbs..  The 2500 kits will raise the rear body height of the vehicle by approximately 7/8" and the 3500 kits will raise the rear body height of the vehicle by approximately 1.0".

We strongly recommended that a professional technician install your Spring Assist Kit.  If equipped, adjusting the ALB system is required to maintain factory braking dynamics.  However, if you have the ability and are equipped with the proper tools you can perform the installation in 2-3 hours.  It is recommended that you do not exceed the manufacturer’s GVW and that tires with E load range are used.  All Spring Assist Kits come with a 1 year part warranty.

If you have any questions concerning other suspension products such as air bags etc., give us a call and we will be happy to assist you.

Order your Sprinter Rear Spring Assist Kit today and enjoy the comfort of better handling and greater safety.

Note: Due to the rising cost of steel, pricing is subject to change without notice

02-06 2500SHC and 2500HC Cargo Van:  $399.95 plus shipping and handling    2500 Cargo Photos

02-06 2500SHC and 2500HC Passenger Van:  $398.95 plus shipping and handling    2500 Passenger Photos

02-06 3500SHC and 3500HC Cargo and Passenger Van:  $594.95 plus shipping and handling

04-06 3500 Cab Chassis:  $594.95 plus shipping and handling    3500 Cab Chassis Photos

Replacement Air Bag Spring Bracket for 3500 TTT Suspension:  $84.95 plus shipping and handling (required when installing our Spring Assist Kit on a Cab Chassis platform with the TTT Air Bag Suspension kit)

07 and Newer 2500 Cargo Van:  $399.95 plus shipping and handling

07 and Newer 2500SHC and 2500HC Passenger Van:  $398.95 plus shipping and handling

07 and Newer 3500 Cargo and Passenger Van:  $594.95 plus shipping and handling

07 and Newer Heavy Duty Kit for the 3500 Cab Chassis:  $594.95 plus shipping and handling   08 Navion Photos

 

Shipping will be DHL ground and will usually ship within 3 business days of ordering.  Estimated shipping and handling costs to west coast $50, to east coast $80.

Click here to order    Warranty and Return Policy

Other Sprinter suspension products are under development and will be released when testing is complete!

 

[Home] [Up] [Diesel Power] [Sprinter Store] [Ease Diagnostics] [Upscale Automotive]

Copyright © 1996-2009 Upscale Automotive, Inc.
Last modified: July 30, 2009