We now offer an affordable and professional scan tool that will scan your Sprinter. The Ease Diagnostics Scan Tool uses the Controller Area Network (CAN) protocol via the On Board Data port (OBD) to detect Diagnostic Trouble Codes (DTC) and view live generic data parameters. If you have a Malfunction Indicator Light on (MIL or check engine light), you can turn it off when your diagnostic testing is complete.
-
With the Ease Scan Tool you can view the following live parameters:
-
Emission Related DTC Count
-
Engine Coolant Temp (ECT) - measured in degrees F
-
Fuel Economy Instantaneous - measured in MPG
-
Fuel Economy Average - measured in MPG
-
Intake Air Temp (IAT) - measured in degrees F
-
Calculated Load - measured in %
-
Air Flow Rate MAF Sensor (Mass Air Flow Sensor) - measured in gm/s
-
Air Flow Rate MAF Sensor (Mass Air Flow Sensor) - measured in lb/min
-
Intake Manifold Absolute Pressure (MAP) - measured in in.hg
-
Intake Manifold Absolute Pressure (MAP) - measured in Volts
-
MIL Status
-
Engine RPM
-
Absolute Throttle Position (TPS) - measured in %
-
Engine Vacuum - measured in in.hg
-
Acceleration - measured in G-force
-
Vehicle Speed - measured in MPH
You can view up to 6 live graphs or 9 live meters at one time. You can also make and save an unlimited number (and length) of scans or recordings. The file system allows you to create a whole history of recordings and reports for the entire time you own your Sprinter. If you have a drivability problem or just want to run a status check, you can use your laptop to make recordings while you are driving! Once your test drive is complete, you can then replay your recording in graph or meter mode and analyze the results. Freeze frame capability allows you to view snapshots taken of parameters during your recording or of a DTC event. The library of DTC's, Acronyms and Parameters will help you understand the technical side of your Sprinter. Many of our fleet customers scan their vehicles before going to the dealer so they have basic knowledge of the problem or vehicle condition beforehand.
The Ease Scan Tool is a Windows based software program with an RS232 cabled interface box and OBDII cable connecting to the vehicle. A wireless up-grade is also available. With a few exceptions, you can scan any 1996 and newer vehicle so you may have other vehicles that you can use this tool on. The scan tool is designed for PC desktop or laptop computers and is very intuitive to use.
At this time the Sprinter data is only accessible via the Ease Generic Scan Tool module that gives you the generic or basic information required by law (will not give PID Codes and descriptions on 02-03 Sprinters). The next major up-date may include enhanced capabilities for the Sprinter via the Chrysler module but at a higher price.
Order your scan tool today and keep an eye on the pulse of your Sprinter!
Ease Generic Scan Tool - $389.00 for computers with USB port (plus shipping and handling)
Yearly vehicle data and software up-dates are $79.00 plus shipping and handling
System requirements: Windows 95, 98, NT, ME, 2000, XP or Vista
Will work with MAC Boot Camp
Pentium 166 MHz or greater or 100% compatible desktop or laptop computer
32 MB RAM, Large capacity hard disk drive
One free USB port or one free serial communication port*
Monitor, Mouse, Keyboard, CD-ROM Drive
*An adapter is available that will allow the Scan Tool to connect to the USB port on your computer.
Shipping will be UPS ground and will usually ship within 3 business days of ordering. Estimated shipping time is 5-6 business days. Estimated shipping cost is $15.00.
Click to Order Warranty and Return Policy
Scan Tool showing the Datagrid screen
Scan Tool showing 4 of a possible 6 graphs
Scan Tool showing meter in minimum, current and maximum screen