The above graph shows one set of several dyno runs performed throughout the testing day. The figures below represent a set of runs resulting in the highest hp and torque gain verses a base line stock run.
HP and Torque results AT REAR WHEEL (which is different than static engine specs):
Stock base line run
MPH RPM HP Torque
43.5 2037 59.70 154
49.7 2328 79.80 180
55.9 2619 95.00 191
62.1 2910 108.3 196
72.1 3376 121.2 189
HP and Torque results AT THE REAR WHEEL with Diesel Power CR Tuning Module installed in the B setting and under a sustained load:
MPH RPM HP Torque HP% & Torque% Increase
43.5 2037 82.5 213 27.6% 27.7%
49.7 2328 100.9 228 18.2% 21.0%
55.9 2619 117.2 233 18.9% 18.0%
62.1 2910 128.2 231 15.5% 15.2%
72.1 3376 150.1 233 19.3% 18.9%